The presence of hardwood flooring is recognizable to anyone, and its main appeal is the natural wood colors and the appealing pattern of the wood’s grain, which varies depending on the species of wood. Wood flooring is not recommended in any location where water or moisture is a constant presence, although it’s often fine in a kitchen, where spills can be wiped up immediately. Hardwood can be scarred by intense heat, though mild scorch marks can sometimes be sanded out and refinished. For Best Results just Visit once to our Hardwood Flooring Katy TX!
Hardwood flooring is by far easier to clean. Simple sweeping or vacuuming removes loose dirt and periodic damp-mopping with a wood cleaner will remove deeper dirt and most stains.
Properly maintained, hardwood flooring can last for many years, and some of the higher-end materials can last for decades. If done correctly, most floors can be sanded three or even four times over their lifespan. Between these full-scale sanding jobs, the surface varnish should be renewed every few years. This usually involves lightly abrading the finish with a sanding screen, then applying a good-quality polyurethane varnish.
Hardwood flooring is usually installed by laying individual rows of boards one at a time, beginning at the longest, most visible wall. Subsequent boards are installed by sliding the edge grooves into the tongues of the preceding boards, then nailing the boards to the joists with nails or stapled driven at an angle down through the tongues. If the flooring boards are unfinished, the floor is then sanded, stained, and top-coated with several coats of polyurethane varnish. However, it’s more common these days for solid hardwood flooring to be pre-finished at the factory, as is also true of all engineered hardwood flooring products. Hardwood flooring installation is usually done by professionals.
For best Hardwood Flooring results Contact Flooring land Store Katy TX!